EasyManuals Logo

Canon imagePROGRAF iPF6400 User Manual

Canon imagePROGRAF iPF6400
966 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #683 background imageLoading...
Page #683 background image
3
Click the Port tab to display the Port sheet.
4
Click Add Port to display the Printer Ports dialog box.
5
In the Available Port list, select Standard TCP/IP Port.
6
Click New Port.
After the wizard starts, a window is displayed for the Welcome to the Add Standard TCP/IP Printer Port Wiz-
ard.
7
Click Next.
8
In Printer Name or IP Address, enter the printer's IP address. If the DNS is configured, you can also enter the
DNS Domain Name.
9
Follow the instructions on the screen to add a printer port.
10
Click Close to close the Printer Ports dialog box.
11
Make sure the printer port you added is displayed under Ports, and that the port is selected.
12
Click Close to close the printer properties window.
Configuring the Printer Driver Destination (Mac OS X)
Configuring the Printer Driver Destination (Mac OS X)
Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over a
network connection instead of via USB connection.
If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destina-
tion in TCP/IP Networks ." →P.694
If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ." →P.695
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
3
If a password has been set on the printer, enter the password.
4
Click Network in the Device Manager menu at left to display the Network page.
5
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
iPF6400
Configuring the Printer Driver Destination (Mac OS X)
User's Guide
Network Setting Initial Settings
683

Table of Contents

Other manuals for Canon imagePROGRAF iPF6400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF6400 and is the answer not in the manual?

Canon imagePROGRAF iPF6400 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution2400 x 1200 DPI
Page description languagesGARO
Maximum print size-
Maximum roll length18 m
ISO A-series sizes (A0...A9)A1, A2
ISO B-series sizes (B0...B9)B2
Internal memory384 MB
Sound pressure level (printing)47 dB
Power supply100 W
Power consumption (off)5 W
Power consumption (standby)6 W
Storage temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
USB portNo
USB 2.0 ports quantity0

Related product manuals