Handling rolls
Handling rolls
Loading Rolls on the Roll Holder .................................................................................................................................... 531
Loading Rolls in the Printer ............................................................................................................................................... 534
Changing the Type of Paper ............................................................................................................................................ 536
Specifying the Paper Length ............................................................................................................................................ 537
Removing the Roll from the Printer .............................................................................................................................. 538
Removing Rolls From the Roll Holder ........................................................................................................................... 540
Clearing Jammed Roll Paper ............................................................................................................................................ 881
Clearing Jammed Paper (Paper Feed Slot) ................................................................................................................ 880
Feeding Roll Paper Manually ............................................................................................................................................ 541
Keeping Track of the Amount of Roll Paper Left ................................................................................................... 542
Specifying the Ink Drying Time for Rolls .................................................................................................................... 542
Specifying the Cutting Method for Rolls .................................................................................................................... 544
Cutting the Leading Edge of Roll Paper Automatically ........................................................................................ 548
Reducing Dust from Cutting Rolls ................................................................................................................................. 550
Roll Holder Set ........................................................................................................................................................................ 551
Removing the Roll Feed Unit ............................................................................................................................................ 551
Installing the Roll Feed Unit .............................................................................................................................................. 552
Loading Rolls on the Roll Holder
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped
with the 2-Inch Paper Core Attachment installed.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the
Roll Holder.
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper Roll Holder Side Holder Stopper Roll Holder Side
For 2-inch paper cores No Attachment Needed For 3-inch paper cores 3-Inch Paper Core Attachment
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause injury.
iPF6400
Loading Rolls on the Roll Holder
User's Guide
Handling and Use of Paper Handling rolls
531
To Next Page
Loading...
Need help?
General
