Canon imagePROGRAF iPF6400 User Manual

3 Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4
Press ▲ or ▼ to select NetWare, and then press the OK button.
5 Press ▲ or ▼ to select NetWare, and then press the OK button.
6 Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7 Press ▲ or ▼ to select Frame Type, and then press the OK button.
8 Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9 Press ▲ or ▼ to select Print Service, and then press the OK button.
10 Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11
Press the Menu button.
If you have changed any settings, a confirmation message is
displayed. In this case, press the OK button.
Important
• Be sure to complete step 11. This will activate the values you have entered.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel this process, press the Back button.
Specifying NetWare Print Services
Specifying NetWare Print Services
Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so on.
You can configure the print service settings from a computer using any of the following Novell software provided with
NetWare.
• NWADMIN
• PCONSOLE
Important
• If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client software) must be instal-
led as the client software application.
• NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on
the environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following descriptions as needed.
iPF6400 Specifying NetWare Print Services
User's Guide
Network Setting NetWare Settings
689

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0