3
If Addin imageprograf print plug-in (ipfaddinif.dll) is
displayed in the Disabled Items dialog box, select it
and click the Enable button.
4
Close all the dialog boxes and restart the Office application.
To start from Microsoft Word
To start from Microsoft Word
Below are the steps to start Print Plug-In for Office from Microsoft Word.
1
Start Microsoft Word.
2
If Start imagePROGRAF Print Plug-In is displayed on the toolbar/
ribbon, click it.
Important
• If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed →P.321
3
Check that the imagePROGRAF Print Plug-In toolbar/ribbon
is displayed.
4
Click the buttons on the toolbar/ribbon according to the items you want to set.
Icon Contents
Menu
Displays the About, Help, and Special Settings dialog boxes.
You can change the settings using the Special Settings dialog box.
Refer to Configuring Special Settings →P.356 for details.
Printer list
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed again. Select
this when you want to display all printer drivers or update the display.
Print Button
The print Wizard is displayed.
The settings Print Matching Roll Width, Borderless Printing, Multi-Page Printing, and Print
Using Registered Settings can be set.
Paper Settings Button
Large-Format Wizard is displayed.
Settings for Portrait or Landscape Orientation can be set.
iPF6400
To start from Microsoft Word (Windows)
User's Guide
Windows Software Print Plug-In for Office
325
To Next Page
Loading...
Need help?
General
