10
Select the B Borderless Printing check box to display
the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
In C Borderless Printing Method, click D Fit Paper Size.
14
Click Match Page Size in the G Paper Size list.
15
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." →P.178
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Holder.
(See "Loading Rolls on the Roll Holder →P.531 ")
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
Important
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
•
Document: Any type
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
iPF6400
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
User's Guide
Enhanced Printing Options Borderless Printing
99
To Next Page
Loading...
Need help?
General
