Canon imagePROGRAF iPF6400 - Installing the Roll Feed Unit

2
Use a coin or screwdriver to loosen the screws (a) on
both sides of the back of the Roll Feed Unit, and remove
the screws.
3
Holding the Carrying Handles (a) of the Roll Feed Unit,
remove the Roll Feed Unit from the printer.
Installing the Roll Feed Unit
Installing the Roll Feed Unit
Important
• Always turn off the printer before attaching the Roll Feed Unit. The printer may be damaged if you do not turn it off first.
Installing the Roll Feed Unit iPF6400
User's Guide
Handling and Use of Paper Handling rolls
552