Canon imagePROGRAF iPF6400 User Manual

11 Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3
(420.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
B Roll Width, click L Printer Information on the Main
pane to update the printer information.
12
Make sure C Page Size on the Page Setup pane
shows the original size as specified in C Paper Size in
the Page Attributes dialog box—in this case, ISO A4.
13 Select the D Enlarged/Reduced Printing check box.
14 Make sure E Fit Paper Size is selected.
15 Click ISO A3 in the I Paper Size list.
16 Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings →P.364 "
Resizing Originals to Fit the Roll Width
Resizing Originals to Fit the Roll Width
You can freely adjust the size of originals by enlarging or reducing them as desired.
•
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Resizing Originals to Fit the Roll Width iPF6400
User's Guide
Enhanced Printing Options Printing enlargements or reductions
72

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0