Canon imagePROGRAF iPF6400 User Manual

Using the Output Stacker
Using the Output Stacker
This topic describes how to use the Output Stacker.
Use the Output Stacker in position (1) when storing printed documents.
When the Output Stacker is not used, fold the stacker to stow it in position (2).
Important
• The Output Stacker can hold paper up to 36 inches (914.4 mm) long.
• The number of sheets that can fit in the Output Stacker is one sheet. When printing multiple pages, remove each sheet after
it is printed.
• Before printing banners or other long documents, tap the Output Stacker. We recommend that you spread a clean cloth or
paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface from becoming dirty or
scratched. (See "Specifying the Cutting Method for Rolls.") →P.544
Use the Output Stacker in the regular position (a).
The stacker may also be used in the extended position (b) for some types of paper. To switch to the extended position,
move the Support Rod to position (b). The extended position enables easy removal after printing.
Using the Output Stacker
iPF6400
User's Guide
Handling and Use of Paper Output Stacker
564

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0