Canon imagePROGRAF iPF6400 User Manual

Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .................................................................................................. 925
Cannot print as specified. ................................................................................................................................................. 925
Cannot adjust printhead. ................................................................................................................................................... 928
Cannot calibrate. ................................................................................................................................................................... 925
Excessive temperature or humidity. .............................................................................................................................. 926
Please execute common calibration. ............................................................................................................................ 926
Please commn calibrt using above paper. .................................................................................................................. 926
Please calibrate using above paper. ............................................................................................................................. 926
Before borderless printing, move the blue platen switch. ................................................................................... 926
Borderless printng not possible. ..................................................................................................................................... 921
Blue platen switch is dirty. ................................................................................................................................................. 927
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................. 927
Cannot adjust paper feed. ................................................................................................................................................ 927
Check printed document. .................................................................................................................................................. 927
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible with
color calibration is not
loaded.
1.
Press the OK button to clear the error.
2. Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide.)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
Cannot print as specified.
Cannot print as specified.
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet
or other printer status information.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.") →P.560
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.") →P.26
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cannot calibrate.
Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Otherwise,
you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide.)
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.") →P.891
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
iPF6400
Cannot execute this command. Use other paper.
User's Guide
Error Message Messages regarding printing or adjustment
925

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0