Canon imagePROGRAF iPF6400 User Manual

Executing Color Calibration
Executing Color Calibration
The procedure for executing color calibration is as follows.
Getting the Printer Ready
1 You can confirm whether the paper to be loaded can be used in color calibration.
(See "Paper that can be used in Color Calibration.") →P.760
2 Load the paper.
(See "Loading Rolls on the Roll Holder.") →P.531
(See "Loading Rolls in the Printer.") →P.534
(See "Loading Sheets in the Feed Slot.") →P.554
Note
• If Adj. Quality has not been executed even once on the paper you are using when you execute Auto Adjust (High
Precision), execute Adj. Quality in the control panel menu.
(See "Automatic Banding Adjustment.") →P.738
3 If a spectrophotometer unit is mounted, select the White/Black Backing Plate color.
We recommend white.
Note
• For the color of the White/Black Backing Plate, continue using the selected color without changing each time you
execute color calibration.
Executing Color Calibration
1
Open the Calibration sheet.
Executing Color Calibration (Windows) iPF6400
User's Guide
Color Management Color Calibration Management Console (Windows)
782

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0