EasyManuals Logo

Canon imagePROGRAF iPF6400 User Manual

Canon imagePROGRAF iPF6400
966 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #920 background imageLoading...
Page #920 background image
Cannot detect papr
Cannot detect papr
Cause Corrective Action
The printer could not detect the paper. Reload the paper as follows.
1.
Remove the paper and press the OK button.
2.
Reload the paper.
(See "Loading Sheets in the Feed Slot.") →P.554
(See "Loading Rolls in the Printer.") →P.534
Cannot feed paper.
Cannot feed paper.
Cause Corrective Action
Paper could not be ad-
vanced correctly during
feeding.
1.
Press the OK button.
2.
Remove the paper.
(See "Clearing Jammed Roll Paper.") →P.881
(See "Clearing a Jammed Sheet, Fed Manually.") →P.884
3.
Load the paper.
(See "Loading Rolls in the Printer.") →P.534
(See "Loading Sheets in the Feed Slot.") →P.554
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
Paper could not be ad-
vanced correctly during
ejection.
1.
Press the OK button.
2.
Remove the paper.
(See "Clearing Jammed Roll Paper.") →P.881
(See "Clearing a Jammed Sheet, Fed Manually.") →P.884
Cannot cut paper.
Cannot cut paper.
Cause Corrective Action
There are sheets left on the Ejec-
tion Guide.
1.
Press the OK button and remove the paper.
2.
Load paper.
3.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") →P.534
There is a foreign object by the
Output Tray, obstructing the Cut-
ter Unit.
1.
Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer un-
der the recommended environ-
mental conditions for the paper.
Use the printer only where the recommended environmental conditions for the paper are met. Note that
various environmental conditions are recommended for various types of paper. For details on the recom-
mended environmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide .)
You are using paper that is not
compatible with automatic cutting.
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.") →P.544
For information about paper that is compatible with automatic cutting, see the Paper Reference Guide.
(See Paper Reference Guide .)
2.
Press the OK button and remove the paper.
Cannot detect papr
iPF6400
User's Guide
Error Message Messages regarding paper
920

Table of Contents

Other manuals for Canon imagePROGRAF iPF6400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF6400 and is the answer not in the manual?

Canon imagePROGRAF iPF6400 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution2400 x 1200 DPI
Page description languagesGARO
Maximum print size-
Maximum roll length18 m
ISO A-series sizes (A0...A9)A1, A2
ISO B-series sizes (B0...B9)B2
Internal memory384 MB
Sound pressure level (printing)47 dB
Power supply100 W
Power consumption (off)5 W
Power consumption (standby)6 W
Storage temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
USB portNo
USB 2.0 ports quantity0

Related product manuals