Output Settings Panel
Output Settings Panel
•
Enlarged/Reduced Printing
Select the method for enlarged/reduced printing.
The following settings are available for enlarged/reduced printing.
Setting Details
Fit Paper Size Enlarges/reduces the whole page automatically to fit the media size selected for output. Select
the media size to print from Paper Size.
Fit Roll Paper Width Enlarges/reduces the whole page automatically to fit the width of the roll paper with the page
width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper Width in
the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Scaling Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value in nu-
merical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that does not
fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
•
Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specific
media type is used.
Note
• Available only if rolls are selected in Paper Source.
•
Paper Size
You can select the size of the print media.
Note
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Output Settings Panel (Mac OS X)
iPF6400
User's Guide
Mac OS X Software Color imageRUNNER Enlargement Copy
454
To Next Page
Loading...
Need help?
General
