Canon imagePROGRAF iPF6400 User Manual

Messages regarding ink
Messages regarding ink
Ink insufficient. ....................................................................................................................................................................... 923
No ink left. ................................................................................................................................................................................ 923
Remaining level of the ink cannot be correctly detected. Check ink tank. .................................................. 923
Cannot detect ink level correctly. Close tank cover. ............................................................................................. 923
Close Ink Tank Cover ........................................................................................................................................................... 923
Ink tank is empty. .................................................................................................................................................................. 924
Not much ink is left. ............................................................................................................................................................. 924
Check if ink tank is set, and its color and direction. .............................................................................................. 924
The following ink tanks cannot be recognized. ........................................................................................................ 924
Do not pull out ink tank. ..................................................................................................................................................... 924
Ink insufficient.
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or
do other operations that require ink.
Press the OK button and replace the Ink Tank that is low with a new Ink
Tank.
(See "Replacing Ink Tanks.") →P.836
No ink left.
No ink left.
Cause Corrective Action
There is no ink left.
There are no ink colors with × displayed above the re-
maining ink indicator.
Press the OK button, open the Ink Tank Cover, and replace the Ink Tank for the
color that is out of ink.
(See "Replacing Ink Tanks.") →P.836
Remaining level of the ink cannot be correctly detected. Check ink tank.
Remaining level of the ink cannot be correctly detected. Check ink tank.
Cause Corrective Action
Ink level detection cannot work correctly if you
use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection and take the
appropriate action. (See "Ink Level Detection.") →P.907
Cannot detect ink level correctly. Close tank cover.
Cannot detect ink level correctly. Close tank cover.
Cause Corrective Action
The remaining ink level could not be correctly detected. Close the Ink Tank Cover.
The buzzer stops sounding.
Next, "No ink left." is displayed and see "No ink left.." →P.923
Close Ink Tank Cover
Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
iPF6400
Ink insufficient.
User's Guide
Error Message Messages regarding ink
923

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0