4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is rewound.
Important
•
If you have selected ManageRemainRoll > On in the Control
Panel menu, a barcode is printed on the leading edge of the
roll.
Do not remove the roll before the barcode is printed. You will
be unable to keep track of the amount of roll paper left. (See
"Keeping Track of the Amount of Roll Paper Left.") →P.542
5
Open the Roll Feed Unit Cover.
6
Using both hands, rotate the Roll Holder toward the
back to rewind the roll.
Note
• If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer.
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
iPF6400
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
539
To Next Page
Loading...
