Canon imagePROGRAF iPF6400 User Manual

Setting Standard Prices
1 Select the media type in Media Type.
2 Enter the Width and Length of the paper, as well as the Price for the area of the configured width x height.
3 Click the Add button. To change the unit cost of a media type that has already been configured, click the Over-
write button.
4 Click the OK button.
Important
• The settings are not applied until you click the OK button.
Specifying Price by Roll Paper
1 Select the media type in Media Type.
2
Click the Roll Paper Width Settings button to display
the Roll Paper Width Settings dialog box.
3 Enter the Roll Paper Width and Length of the paper, as well as the Price for the configured length.
4 Click the Add button to return to the Paper sheet.
5 To change the unit cost of a media type that has already been configured, click the Overwrite button.
6 Click the OK button.
Important
• If you do not set the standard prices, you cannot set the price for each roll paper.
• If the Roll Paper Width is set to the same value as the Width of the paper configured in the standard prices, the cost is
calculated using the price configured in the Roll Paper Width Settings dialog box.
• The settings are not applied until you click the OK button.
iPF6400 Setting the Unit Cost for Paper
User's Guide
Print Job Management Accounting (Windows)
719

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0