Canon imagePROGRAF iPF6400 User Manual

• The media types shown in the table are the names that are displayed in the printer Control Panel.
Paper Type
Country or Region of Use selected when the Media Configuration
Tool was installed
Adjustment Type
Japan, Asia, Oce-
ania
EU
North or South
America
Opaque Paper 120 Not available Available Not available Common calibration
HW Coated Available Available Available Common calibration
GlossyPhoto 170g Available Available Available Common calibration
SatinPhoto 170g Available Available Available Common calibration
GlossyPhotoHG170 Available Available Available Common calibration
SemGlsPhotoHG170 Available Available Available Common calibration
GlossyPhoto 200g Not available Available Available Common calibration
SatinPhoto 200g Not available Available Available Common calibration
GlossyPhoto 240 Not available Available Available Common calibration
SatinPhoto 240 Not available Available Available Common calibration
GlossyPhotoHG255 Available Available Available Common calibration
SemGlsPhotoHG255 Available Available Available Common calibration
RC Photo Luster Not available Not available Available Unique calibration
Premium Gl2 280 Available Available Available Common calibration
Prem.SemiGl2 280 Available Available Available Common calibration
Photo Pro Plat. Available Available Available Common calibration
LW Gloss Proof(*1) Available Not available Available Unique calibration
LW Matte Proof(*1) Available Not available Available Unique calibration
Proofing Paper3 Available Not available Available Unique calibration
Proofing Paper Available Not available Available Common calibration
Proof SemiGl 195 Not available Available Not available Unique calibration
FineArt Photo Available Available Available Common calibration
FneArt HW Photo Available Available Available Common calibration
*1: The RIP software is required.
Note
• If the paper you are using is not specified in media type, execute color calibration using the paper where the adjustment type
is Common calibration, then you can set the calibration adjustment values for the paper you are using.
• The settings for each media type can be changed using Media Configuration Tool.
Not available media types can be displayed in the Control Panel by changing the settings.
(See "Switching Media Types Display Show/Hide (Windows).") →P.578
(See "Switching Media Types Display Show/Hide (Mac OS X).") →P.611
Paper Sizes that can be Used in Color Calibration
Paper sizes that can be used in color calibration differ for sheets and rolls.
For details, refer to the Paper Reference Guide.
When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide
(however, a roll at least 406.4 mm (16.00 in) wide depending on the paper type)
When Using Sheets One sheet of unused paper of at least A4/Letter size
(however, one sheet of unused paper of at least A2 size depending on the paper type)
iPF6400
Paper that can be used in Color Calibration
User's Guide
Color Management Color Calibration
761

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0