Canon imagePROGRAF iPF6400 User Manual

Note
• This step can be executed when a printer that has a spectrophotometer unit installed is selected.
Getting the Printer Ready
1 Confirm whether the paper to be loaded can be used for acquiring color measurement data.
2 Load the paper.
(See "Loading Rolls on the Roll Holder.") →P.531
(See "Loading Rolls in the Printer.") →P.534
Note
• If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
(See "Automatic Banding Adjustment.") →P.738
3 Select the White/Black Backing Plate color.
Acquiring Color Measurement Data
1
Open the Color Measurement sheet.
2
Select the printer you want to measure the color chart
on from the Printer list.
Acquiring Color Measurement Data For Any Color Chart (Windows) iPF6400
User's Guide
Color Management Color Calibration Management Console (Windows)
786

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0