2
Click the Settings button for Color Check in the Print-
er Information dialog box.
3
Enter the color check threshold value in ΔE and click the
OK button.
Getting the Printer Ready
1
Confirm whether the paper to be loaded can be used for color checks.
Paper for color check is paper that can be used with the Auto Adjust (High Precision) setting on the spectro-
photometer unit.
2
Load the paper.
(See "Loading Rolls on the Roll Holder.") →P.531
(See "Loading Rolls in the Printer.") →P.534
Note
• If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
(See "Automatic Banding Adjustment.") →P.738
iPF6400
Executing Color Check (Windows)
User's Guide
Color Management Color Calibration Management Console (Windows)
793
To Next Page
Loading...
