Access the menu for Ink Tank replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Ink tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the
OK button.
The Ink Menu is displayed.
3
Press ▲ or ▼ to select Rep. Ink Tank, and then press the OK button.
A message on the Display Screen requests you to open the Ink Tank Cover. Remove the Ink Tank at this point.
Remove the Ink Tanks
→User's Guide (HTML)
1
Open the Ink Tank Cover and check the ink lamps.
Ink lamps flash when there is little ink left.
Replacing Ink Tanks
iPF6400
User's Guide
Maintenance and Consumables Ink Tanks
838
To Next Page
Loading...
