*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Memory
Memory 384 MB
Interface
Hi-Speed USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Gigabit Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compatible),
HTTP, TCP/IP (IPv4/IPv6), AppleTalk
Ink
For information on the ink the printer supports, see "Ink Tanks." →P.836
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference
Guide.)
For information on the paper sizes the printer supports, see "Paper Sizes." →P.524
Paper width Rolls 203–610 mm (8.0–24.0 in)
Sheets Top Paper Feed Slot 203–610 mm (8.0–24.0 in)
Front Paper Feed Slot 250–610 mm (9.9–24.0 in)
Minimum paper length Rolls 203 mm (8.0 in)
Sheets Top Paper Feed Slot 279 mm (11.0 in)
Front Paper Feed Slot 350 mm (13.8 in)
Maximum printable
length (*1)
Rolls 18 m (19.7 yd)
Sheets Top Paper Feed Slot 1,600 mm (63.0 in)
Front Paper Feed Slot 914 mm (36.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets Top Paper Feed Slot 0.07–0.8 mm (0.0028–0.031 in)
Front Paper Feed Slot 0.5–1.5 mm (0.020–0.059 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." →P.936
*1: Varies depending on the operating system or application.
iPF6400
Specifications
User's Guide
Specifications Printer Specifications
935
To Next Page
Loading...
Need help?
General
