Chapter 4
4-45
6) While pressing down the protrusion[A], slide the spur unit[1] in the direction of the arrow to remove it.
F-4-99
c) Handling the Feed Roller
The feed roller is an important mechanical component of the printer. Follow the precaution below when handling it.
- Do not touch the feed roller surface(coated surface).
- Do not scratch or dent the feed roller.
d) Removing the platen shutter
1) Remove the hook by using the flat-head screwdriver to remove the platen shutter [1].
F-4-100
The platen is an important mechanical component of the printer. Take care not to damage or remove the platen.
[1][A]
[1]
To Next Page
Loading...
