Canon iPF6100 - Roll Feed Unit PCB

Chapter 6
6-79
6.2.9 Roll feed unit PCB
0013-3771
iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S
F-6-9
T-6-126
T-6-127
T-6-128
J1 (Connect to Main controller PCB)
Pin Number Signal name IN/OUT Function
1 GND - GND
2 GND - GND
3 ROLL_CLK IN Roll motor driver clock signal
4 ROLL_DAT IN Roll motor driver data signal
5 ROLL_STB IN Roll motor driver strobe signal
6 /ROLL_SLEEP IN Roll motor driver sleep signal
7 VM IN Power supply (+26V)
8 VM IN Power supply (+26V)
9 ROLL_UNIT OUT Roll unit detection signal
10 ROLL_PAPER_SNS OUT Roll media sensor signal
11 ROLL_CAM_SNS OUT Roll cam sensor signal
12 GND - GND
13 OPT_5V IN Power supply (+5V)
J2 (Roll media sensor )
Pin Number Signal name IN/OUT Function
1 +5V OUT Power supply (+5V)
2 GND - GND
3 ROLL_PAPER_SNS IN Roll media sensor signal
J3 (Roll cam sensor, roll motor)
Pin Number Signal name IN/OUT Function
1 +5V OUT Power supply (+5V)
2 GND - GND
3 ROLL_CAM_SNS IN Roll cam sensor signal
4 GND - GND
5 ROLL_OUTAP OUT Roll motor drive signal AP
6 ROLL_OUTAM OUT Roll motor power supply AM
7 ROLL_OUTBP OUT Roll motor drive signal BP
8 ROLL_OUTBM OUT Roll motor power supply BM
J1
J2
J3