Canon iPF6100 - Roll Feed Unit

Chapter 4
4-46
4.3.12 Roll Feed Unit
0013-4377
iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S
a) Removing the roll motor
1) When removing the roll motor, remove the roll feed unit[2] from the main body, and then remove the right cover[3] by removing the two screws[1].
F-4-101
2) Remove the four screws[1], and then remove the left cover[2] and paper tray[3].
F-4-102
3) Remove the three screws[1], and then remove the right inner cover[2].
F-4-103
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]