Canon iPF6100 - Page 571

Chapter 7
7-61
b) I/O DISPLAY
The status of each sensor and switch is shown in the display.
Sensor and switch status is shown in the display.
ON = 1
OFF or not used = 0
Screen 1
F-7-6
Screen 2
F-7-7
Screen 1 and Screen 2 are selectable with the and keys.
These screens display the associated sensor status as listed in the table below.
T-7-118
Display
position
Sensor name LCD display contents
1 Pump Cam Sensor 0:Sensor ON, 1:Sensor OFF
2 Valve Open/Closed Detection Sensor 0:Sensor ON, 1:Sensor OFF
3 (Not Used) -
4 (Not Used) -
5 Spur Cam Sensor 0:Sensor ON, 1:Sensor OFF
6 Lift Cam Sensor 0:Sensor ON, 1:Sensor OFF
7 Feed Roller HP Sensor 0:Sensor ON, 1:Sensor OFF
8 Top Cover Sensor 0:Cover open, 1:Cover close
9 (Not Used) -
10 Ink Tank Cover Switch 0:Cover open, 1:Cover close
11 (Not Used) -
12 Paper Detection Sensor 0:Sensor ON, 1:Sensor OFF
13 (Not Used) -
14 (Not Used) -
15 (Not Used) -
16 (Not Used) -
17 Roll Media Sensor 0:Sensor ON, 1:Sensor OFF
18 Roll Cam Sensor 0:Sensor ON, 1:Sensor OFF
19 Cutter Lift Sensor 0:Sensor ON, 1:Sensor OFF
20 Cutter Right Position Sensor 0:Sensor ON, 1:Sensor OFF
21 Cutter HP Sensor 0:Sensor ON, 1:Sensor OFF
22 (Not Used) -
23 (Not Used) -
24 (Not Used) -
25 (Not Used) -
26 Roll unit detection 0:Roll unit not detected, 1:Roll unit detected
27 (Not Used) -
28 (Not Used) -
29 (Not Used) -
30 (Not Used) -
31 (Not Used) -
32 (Not Used) -
I/O DISPLAY 1
0000000000000000
12345678910111213141516
(Upper row)
(Lower row)
(Display position)
I/O DISPLAY 2
0000000000000000
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
(Upper row)
(Lower row)
(Display position)