Chapter 7
7-88
PARTS
COUNTER
PARTS xx-x xx-x: Unit number of consumable parts
(For details, refer to "Maintenance and Inspection" > "Consumable Parts")
Initialize the counter amount of the consumable parts.
(Clear [COUNTER] > [PARTS CNT.] > [COUNTER xx-x])
* After replacing the consumable part, be sure to execute this menu.
USER SETTING Initializes the user menu.
Same as executing the following mode in the user menu.
-[Set./Adj. Menu]-[System Setup]-[Reset PaprSetngs]
-[Set./Adj. Menu]-[Interface Setup]-[Return Defaults]
CA-KEY See "e-maintenance/imageWARE Remote" for detail.
ERDS-DAT See "e-maintenance/imageWARE Remote" for detail.
JOB LOG Initialize the history of JOB LOG.
Display Description
To Next Page
Loading...
