Canon MF419x - Scanning Using an Application

Scanning Using an Application
0UWX-05C
You can scan documents from applications such as image-processing or word-
processing software. The scanned image is directly loaded in the application,
allowing you to edit or process the image immediately. The following procedure
varies depending on the application.
● The application must be compatible with TWAIN or WIA
*
. For more information, see the instruction manual
for your application.
*
TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an
integrated standard in Windows.
1
Place the document(s). Placing Documents(P. 47)
● The second or subsequent documents may not be scanned, or an error message may be displayed
depending on the application. In such a case, place and scan one document at a time.
● When <Auto Online for Remote Scan> is set to <Off>, you must tap <Scan> <Remote Scanner> in the
Home screen to bring the machine online. Auto Online for Remote Scan(P. 712)
2
From the application, select the start scan command.
● The procedure for selecting the start scan command varies depending on the application. For more
information, see the instruction manual for your application.
3
Select the scanner driver for the machine.
● Select ScanGear MF or WIA. If you select ScanGear MF, you can congure advanced scan settings.
4
Congure the scan settings as necessary.
● For more information about ScanGear MF scan settings, see Conguring Scan Settings in Simple
Mode(P. 314) or Conguring Scan Settings in Advanced Mode(P. 317) .
5
Click [Scan].
➠ Scanning of the document starts.
Using the Machine as a Scanner
311