Canon MF419x - Auto Sleep Time

Default Screen after Startup/Restoration(P. 641) ). If <Selected Function> is selected, the display returns to the main
screen of the function that was selected.
Default Function
Selected Function
<Menu> <Timer Settings> <Function After Auto Reset> Select <Default Function> or
<Selected Function>
Auto Sleep Time
If the machine has not been operated or has had no data to process for a specied period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power.
Entering Sleep Mode(P. 101)
3 to 60 (min.)
Auto Oine Time
If scan is not performed within a specied period of time after the screen below is displayed (the machine is set
online for scanning), the machine automatically becomes oine. Specify the time period at which the machine
becomes oine. You can also set the machine to remain online.
0 (The machine remains online.)
1 to 5 to 60 (min.)
<Menu> <Timer Settings> <Auto Oine Time> Set the time period <Apply>
Auto Shutdown Time
Set a timer to automatically shut down the machine after the specied period of idle time has elapsed since the
machine entered the sleep mode.
Setting Auto Shutdown Time(P. 103)
0 (Auto Shutdown is disabled.)
1 to 4 to 8 (hr.)
Setting Menu List
648