Canon MF419x - Enabling TLS Encrypted Communication for the Remote UI

Enabling TLS Encrypted Communication for the Remote
UI
0UWX-09R
You can encrypt communication between the machine and a Web browser on the computer by using Transport Layer
Security (TLS). TLS is a mechanism for encrypting data sent or received over the network. TLS must be enabled when
the Remote UI is used for specifying settings for IPSec (Pre-Shared Key Method), IEEE 802.1X authentication (TTLS/
PEAP), or SNMPv3. To use TLS for the Remote UI, you need to set a key pair and enable the TLS function. Generate or
install the key pair for TLS before enabling TLS ( Conguring Settings for Key Pairs and Digital
Certicates(P. 588) ).
1
Start the Remote UI and log on in System Manager Mode. Starting Remote
UI(P. 606)
2
Click [Settings/Registration].
3
Click [Network Settings] [TCP/IP Settings].
Security
570