Canon MF419x - Placing Documents in the Feeder; Placing Documents on the Platen Glass

Placing Documents on the Platen Glass
1
Open the feeder.
2
Place the document face down on the platen glass.
● Align the corner of the document with the top-left corner of the platen glass.
● To scan transparent documents (for example, tracing paper or transparencies), cover them with plain
white paper.
3
Gently close the feeder.
➠ The machine is ready to scan the document.
When scanning is complete
● Remove the document from the platen glass.
Placing Documents in the Feeder
1
Spread the document guides apart.
● Slide the document guides outward until they are slightly farther apart than the actual document width.
Basic Operations
48