(Information)
Displays the current settings of the scanned image, such as the color mode and size of the scan area.
[Select Source]
Select the image type to scan documents. Available items vary depending on where you placed the
document.
If you placed the document on the platen glass
[Photo (Color/Platen Glass)] The photo document is scanned as a color image.
[Magazine (Color/Platen Glass)]
Print material, such as a magazine, is scanned as a color image. The color
unevenness and moire that occurs when scanning print images is reduced.
[Newspaper (B&W/Platen Glass)]
The text document or line drawing is scanned as a black and white image (in
black and white only, with no intermediate shades of gray).
[Document (Grayscale/Platen Glass)]
The text or photograph document is scanned as a grayscale image (in black and
white with intermediate shades of gray, similar to a black and white
photograph).
If you placed the document in the feeder
[Document (Color/Feeder)]
The document is scanned as a color image.
[Document (Grayscale/Feeder)] The document is scanned as a grayscale image.
[Select Purpose]
Select a setting based on your intended use of the scanned image.
[Print (300dpi)]
Select when printing the scanned image.
[Image Display (150dpi)] Select when displaying the scanned image on a computer.
[OCR (300dpi)] Select when using the scanned image with OCR (optical character recognition)
software.
[Output Size]
● Select the size of the scanned image when it is printed or displayed on a computer. For example, if you
want to output an image that is appropriate for printing on A4 paper, select [A4], and [Print (300dpi)] for
[Select Purpose] ( ).
● Click
to switch between the portrait and landscape orientation. This button is not available when
[Flexible] is selected.
● If you select [Add/Delete], you can add new output size settings and delete the added sizes.
Using the Machine as a Scanner
315
To Next Page