Canon PRISMAsync v3.2 - Page 89

step Action additional Info
5
Firmware upgrade; validation
As a first step a validation of the firm-
ware will take place.
6
Firmware upgrade; copy to HDD
After the validation the software is cop-
ied to the printer.
7
Normal download mode
As soon as all the software is copied, a
screen is displayed telling you to reset
the DIP switch.
8
Switch to Normal download mode
On the backside of the printer, Set the
DIP switch SW1 to 'OFF' (Lower posi-
tion).
4
Firmware upgrade of Engine and Accessories (safe download mode)
Chapter 8 - Firmware upgrades via PRISMAsync 89
PRISMAsync V3.2