120
If any of these are selected, the processing settings described in (2) will be performed when the status changes to
"detected", when the operation is terminated, or while the status remains "detected".
(2) [E-mail Notification], [Video Record]
Specifies the event operation. Multiple selections are possible.
If [E-mail Notification] is selected, an e-mail notification will be sent at the timing set in (1) according to the setting in
[Video Record] > [E-mail Notification] (P. 102).
If [Video Record] is selected, the video is recorded at the timing set in (1) according to the settings in [Video Record]
> [Upload] > [Video Record Settings] (P. 95) or [Memory Card Recording] > [Video Record Settings] (P. 99).
(3) [Audio Playback at ON Event], [Audio Playback at OFF Event]
Specifies the audio playback timing.
When selected, the audio set in (4) is played back when the status becomes “detected” or when operation is
terminated.
(4) [Sound Clip Name], [Volume]
Specifies the audio to playback at the timing set in (3).
Select an sound clip from audio registered in [Audio] > [Audio] sound clip file register 1 to 3 (P. 94) and set the volume
for the sound clip.
(5) [External Device Output for ON Event], [External Device Output for OFF Event]
Specifies the external device output operation.
Select this to start or stop output to an external device when the status becomes “detected” or when operation is
terminated, and select the operation (active or inactive).
To Next Page
Loading...
