126
When events trigger the switching of Day/Night Mode, presets registered in advance can be executed to change the
camera angle or video quality settings.
Switch Day/Night
[Preset when Switching to Day Mode]
Executes the specified preset when switched to Day Mode.
[Preset when Switching to Night Mode]
Executes the specified preset when switched to Night Mode.
• It is necessary to set presets beforehand with [Video] > [Preset] > [Register Preset] (P. 69).
• Able to set the timing for event-triggered Day/Night Mode switching in [Day/Night Mode Switching] in [External Device Input] (P. 122) or
[Timer] (P. 124).
[Event] > [Switch Day/Night]
• When the user has camera control privileges obtained using the Camera Viewer, the presets for [Preset when Switching to Day mode]
and [Preset when Switching to Night Mode] will not run.
To Next Page
Loading...
