140
Settings for 802.1X authentication and authentication status display, and for certificate management.
802.1X Authentication
Display the 802.1X authentication enable/disable control and status.
[802.1X Authentication]
Select this to enable or disable 802.1X authentication.
[Authentication Status]
Display the status of 802.1X authentication. There are three types of status: [Authenticated], [Unauthenticated], and [Stop].
Authentication Method
Set the authentication method used for 802.1X authentication.
[Authentication Method]
Select [EAP-TLS], [EAP-TTLS], or [EAP-PEAP] as the authentication method to use for 802.1X authentication.
[User Name]
Enter the user name used for authentication.
[Password]
Enter the required password for authentication.
This is displayed only when [Authentication Method] is set to [EAP-TTLS], or [EAP-PEAP].
Client Certificates
This is displayed only when [Authentication Method] is set to [EAP-TLS].
[Client Certificates]
Settings for client certificate for use.
Select a client certificate to use from the certificates registered in [Security] > [Certificate Management] > [Server/Client
Certificate Management], and click [Select]. The selected certificate takes effect after a reboot.
Select the client certificate in use and click [Clear] to uncheck it.
[Certificate Validity Period]
Displays the validity period of the client certificate selected in [Client Certificates].
[Security] > [802.1X]
To Next Page
Loading...
