25
After installing the camera, set the camera angle while checking the video displayed on the Settings page.
The camera angle settings are configured by accessing the following Settings page.
• [Video] > [Camera Angle] (P. 60)
• [System] > [System] > [Installation Conditions] > [Video Flip] (P. 144)
Setting the Camera Angle
• If the camera angle is changed after configuring the intelligent function, it is necessary to reconfigure it.
• If the [Video Flip] setting is changed after setting the preset, ADSR, privacy mask, or intelligent function, it is necessary to reset them.
S820D/S920F
To Next Page
Loading...
