156
Able to update the firmware.
Device Information
[Model Name] and [Firmware Version]
Displays the information about the connected camera.
Update Firmware
Configure the settings related to firmware updates.
[Restore Default Settings]
The initial settings are restored when the firmware is updated.
If this is set to [Restore], the following settings are retained when initializing.
•HTTP Server
• Certificates
•SSL/TLS
• Administrator Name
• Administrator Password
• Host Access Restrictions
• NTP Server
• Time Zone
• Network Settings
[Update Firmware]
Click [Choose File], specify a firmware file for update, and click [Exec]. When the confirmation message is displayed, click
[OK] to start the firmware update.
The camera is rebooted after the firmware is updated.
[Maintenance] > [Update Firmware]
• Do not turn off the camera while it is performing the [Update Firmware] operation. Turning off the camera at this stage may result in
disabling its ability to boot correctly.
To Next Page
Loading...
