56
(1) Video Display Area
Camera video is displayed here. Use the mouse to set the areas, etc. The operations on the video display area are the
same as in the Viewer (P. 36).
The following operations can be performed while the cursor is [
+] in the video display area depending on the Settings
pages.
– Centering the camera angle to the clicked position (P. 36)
– Area zoom operations (P. 37)
(2) Pan/Tilt Slider
Pan and tilt operations in the video display area are the same as in the Viewer (P. 36).
(3) Zoom Slider
Zoom operations in the video display area are the same as in the Viewer (P. 36).
(4) [Screen resize] Button
The size of the video display area is switched between large and small each time this button is clicked.
(5) [Switch Mouse Operation] Button
Click the button to center the camera angle to the position clicked in the video display area while the button is purple.
(6) Panorama Screen/Full-View Screen
Displays the full range of motion of the camera. Setting of areas, etc. can be made using mouse operations on the
panorama screen depending on the Settings pages.
If a panorama image is registered in the camera (P. 89), the panorama image is displayed.
(7) [Reconnect] Button
Reconnects to the camera. Use this button when not connected to the camera.
(8) [Snapshot] Button
Opens the snapshot window and displays a still image of the moment the button is clicked (P. 46).
(9) [Obtain/Release Camera Control Privileges] Button
Obtains or releases the camera control privileges (P. 35).
Each Settings Page
Items in each Settings page are summarized as follows:
Category Item Description
Video
Video
General settings of the video, such as video size and quality
distributed from the camera (P. 58)
Camera Angle Setting the Camera Angle (P. 60)
Preset Registering a series of settings as presets (P. 61)
Preset Tour
Settings for automatically touring multiple presets registered in
advance (P. 71)
Picture (Option) Settings for Camera Control and Day/Night (P. 75)
ADSR Setting ADSR (Area-specific Data Size Reduction) (P. 78)
On-screen display
Displaying the date and time, camera name and any string of
characters on the Video (P. 80)
Privacy Mask
Setting the mask on the area not to be shown in the camera video
(P. 82)
View restriction Setting the range that the camera can capture (P. 85)
Panorama Creation and management of panorama images (P. 89)
Audio Audio
Settings for audio input from the microphone, audio output from the
Viewer and playback of a sound clip (P. 92)
To Next Page
Loading...
