41
• If blown highlights in bright areas are of a concern, set the [Use WDR] on the Settings page to [Enable] (P. 62).
Using Presets or the Home Position
It is possible to control the camera using a preset or home position registered to the camera in advance.
When clicking the preset selection menu and selecting a preset from the list that is displayed, the camera will be set to the
registered setting of the selected preset.
Clicking the [Home Position] button will set the camera angle to the registered setting of the home position.
• Register preset/home positions in advance in [Video] > [Preset] > [Register Preset] (P. 69) on the Settings page. The registered preset is
displayed in the preset selection menu.
• H.265 video cannot be displayed while the Viewer is connected via HTTP. If H.265 is specified as the video compression method of the
digital PTZ, the preset registered with the digital PTZ position cannot be selected.
To Next Page
Loading...
