133
Settings for clients that can connect to a video server.
Video Server
[Maximum Number of Clients]
Enter the maximum number of clients that can be connected to the camera at the same time.
If set to [0], only administrators will be able to connect.
• Even if [Maximum Number of Clients] is set to 10 or more, the number of clients that can display H.264/H.265 video is limited up to 10.
[Camera Control Queue Length]
Enter the maximum queue length for clients requesting camera control privileges from the Camera Viewer.
If set to [0], only administrators can queue for camera control.
[Maximum Connection Time (sec.)]
Enter the maximum time in seconds during which an individual client can connect to the camera.
If set to [0], the connection time is unlimited.
[Camera Control Time (sec.)]
Enter the maximum time Camera Viewer can retain camera control privileges.
[Server] > [Video Server]
• When there are many clients or they are connected to the camera over an SSL/TLS connection, the video frame rate may slow down
and the sound may drop out if audio reception from the camera is enabled.
To Next Page
Loading...
