57
Video Record
Upload
Settings for uploading video via FTP or HTTP when an event is
triggered (P. 95)
Memory Card Recording
Settings for recording video to a memory card when an event is
triggered (P. 99)
E-mail Notification
Settings for sending an e-mail notification to a specified recipient
when an event is triggered (P. 102)
Detection
Audio Detection
Detecting changes in audio input from the microphone, which
triggers operations such as video recording or e-mail notification
(P. 104)
Intelligent Function
Settings for the intelligent functions such as moving object detection,
camera tampering detection, and intrusion detection (P. 106)
Event
External Device
Settings for external device output and operations triggered by
external device input events (P. 121)
Timer
Settings for timer events for performing operations such as video
recording or e-mail notification at regular intervals (P. 124)
Switch Day/Night
Moving the camera angle to preset positions when Day Mode and
Night Mode are switched (P. 126)
Linked Event
Settings for combining two types of events into occurring as a single
event (P. 127)
Server
Server Settings for the HTTP server and SNMP server (P. 131)
Video Server
Settings for clients which can be connected to the Video server
(P. 133)
RTP Server Settings for streaming using RTP (P. 134)
ONVIF ONVIF Settings for WS-Security time checking and Media Profile (P. 136)
Security
Certificate Management Settings for certificate creation and management (P. 137)
SSL/TLS Settings for encrypted communications and server certificate (P. 139)
802.1X
Settings for 802.1X authentication, authentication status display, and
certificate management (P. 140)
User Management
Adding/deleting administrator account information and/or authorized
users, and setting operation privileges (P. 141)
Host Access Restrictions
Settings for individual access control for access from IPv4 and IPv6
addresses (P. 143)
System
System
Settings for camera name and external input/output device name,
and for camera operation and installation (P. 144)
Viewer Settings for startup, authentication, and display of the Viewer (P. 146)
Date and Time Settings for camera date and time (P. 147)
Memory Card
Memory card operations such as mounting/unmounting, formatting
execution, etc. (P. 149)
Network Setting the network to which the camera is connected (P. 150).
Maintenance
General
Performing verification of device information and license, and reboot
and/or initialization of the cameras (P. 153)
Backup / Restore Performing backup and restore (P. 155)
Update Firmware Performing firmware update (P. 156)
Environment
Settings for the system frequency, WDR, intelligent function, and
displaying maximum frame rate (P. 157)
Log Settings for log display and log notification (P. 158)
Category Item Description
To Next Page
Loading...
