125
[Video Record]
Select whether to record video using the timer event.
If [Enable] is selected and a timer event is triggered, video will be transmitted to the recording destination specified
in [Video Record] > [Upload] > [Video Record Settings] > [Video Record Action] (P. 95).
[E-mail Notification]
When [24-Hour Continuous Settings] is set to [Disable], select whether to send an e-mail notification using the timer
event.
If [Enable] is selected, e-mail notification is performed when a timer event is triggered.
To use e-mail notification, it is necessary to set [Video Record] > [E-mail Notification] (P. 102) beforehand.
[External Device Output]
When [24-Hour Continuous Settings] is set to [Disable], select the external device output operation by [Start Time]
and [End Time] of the timer.
[Repeat Interval] is not supported.
[Day/Night Mode Switching]
When [24-Hour Continuous Settings] is set to [Disable], select the Day/Night Mode switching operation when a timer
event is triggered. This can only be set with [Timer 1].
Select [Switch to Day Mode] to switch to Day Mode at [Start Time], and Night Mode at [End Time].
Select [Switch to Night Mode] to switch to Night Mode at [Start Time], and Day Mode at [End Time].
[Repeat Interval] is not supported.
• If [Start Time] and [End Time] are set and a preset with [Start Time Preset] is selected, the settings in
[Day/Night] (P. 65) in [Video] > [Preset] > [Exposure/Compensation] is given priority. Therefore, even if [Day/Night Mode
Switching] is set to [Switch to Day Mode] or [Switch to Night Mode], the [Day/Night Mode Switching] setting will be disabled if
the opposite setting has been configured in [Day/Night].
• When [Video] > [Preset] > [Exposure/Compensation] > [Day/Night] is set to [Auto] (P. 65), [Day/Night Mode Switching] will not
run when a timer event is triggered.
• When the [Day/Night Mode Switching] settings switch Day/Night Mode, camera control privileges are released, even if the user
has obtained those camera control privileges using the Camera Viewer or other camera control applications.
To Next Page
