123
Sound clip must be registered as Sound Clip Upload 1 to 3 (P. 94) in [Audio] > [Audio] in advance.
[Volume]
Enter the volume for the sound clip.
[Day/Night Mode Switching]
Select the Day/Night Mode switching behavior when an external device input event is triggered.
When [Switch to Day Mode] is set, switches to Day Mode when an active event is triggered, and switches to Night Mode
when an inactive event is triggered.
When [Switch to Night Mode] is set, switches to Night Mode when an active event is triggered, and switches to Day Mode
when an inactive event is triggered.
• When [Video] > [Preset] > [Exposure/Compensation] > [Day/Night] is set to [Auto] (P. 65), [Day/Night Mode Switching] will not run
when an external device input event is triggered.
• When the [Day/Night Mode Switching] settings switch Day/Night Mode, camera control privileges are released, even if the user has
obtained those camera control privileges using the Camera Viewer or other camera control applications.
To Next Page
