128
[Timer]
Select the timer event number to use in [Timer].
[Intelligent Function]
Select the Intelligent Function detection setting number (P. 110) to use in [Intelligent Function], then select an ON
event or OFF event to trigger a linked event in [Intelligent Function Status].
• Unable to set the same event type for [Event 1] and [Event 2]. However, a combination of [Timer 1] to
[Timer 4] can be specified for [Timer].
Also, a combination of [Input 1] and [Input 2] can be specified for [External Device Input].
Operation
Set the operations to be performed when linked events are triggered.
[ON Event Operation]
If [Enable] is set, [Preset] ( ), [Video Record] and [E-mail Notification]
will be executed according to their settings when a linked event is triggered (ON event).
[OFF Event Operation]
If [Enable] is set, [Preset] ( ), [Video Record] and [E-mail Notification]
will be executed according to their settings when a linked event is completed (OFF event).
[Ongoing ON Event Operation]
Select the operation to be performed during an ON event.
If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the
linked event.
[Preset]
If a preset is specified, the camera angle will automatically move to the preset location when a linked event is
triggered.
It is necessary to set presets beforehand with [Video] > [Preset] (P. 61).
• [Preset] cannot be configured when [Intelligent Function] is included in [Event Type].
[Video Record]
Select whether to record video depending on the linked event.
If [Enable] is selected and a linked event is triggered, video will be transmitted to the recording destination specified
in [Video Record] > [Upload] > [Video Record Settings] > [Video Record Action] (P. 95).
[E-mail Notification]
Select whether to send an e-mail notification by the linked event.
If [Enable] is selected and a linked event is triggered, an e-mail notification will be sent.
To use e-mail notification, it is necessary to set [Video Record] > [E-mail Notification] (P. 102) beforehand.
[External Device Output for ON Event]
Select the state of external device output when an ON event is triggered.
[External Device Output for OFF Event]
Select the state of external device output when an OFF event is triggered.
[Audio Playback at ON Event]
If [Enable] is selected, the sound clip specified in [Sound Clip] will playback when a linked event is triggered.
[Audio Playback at OFF Event]
If [Enable] is selected, the sound clip specified in [Sound Clip] will playback when a linked event completes.
• [Audio Playback at ON Event] and [Audio Playback at OFF Event] can only be set when [External Device Input] and [Intelligent
Function] is selected as [Event Type] in [Event 1] and [Event 2].
[Sound Clip]
Select the sound clip when [Audio Playback at ON Event] or [Audio Playback at OFF Event] has been set to [Enable].
Sound clip must be registered as Sound Clip Upload 1 to 3 (P. 94) in [Audio] > [Audio] in advance.
HM4x
S32D
S32D
HM4x S32VE
HM4x S32VE
HM4x
To Next Page
Loading...
