148
[Synchronize with computer time]
The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],
[Settings Method] will change to [Set manually].
[Time Zone] is not automatically selected, so set it if necessary.
• When unable to connect to the NTP server due to incorrect NTP server IP address, etc., [Last Sync Time] will not be updated, or will be
left blank.
[Time Zone]
Select the appropriate time zone.
When the time zone is changed and [Apply] is clicked, the date and time display will be automatically changed based on
the selected time zone.
[Daylight Saving Time]
Select whether to automatically adjust for daylight saving time according to the time zone.
To Next Page
Loading...
