165
Flickering (uneven brightness on the screen
due to fluorescent light, etc.) occurs.
• This might be reduced by the following measures:
– Change the exposure mode to [Auto (Flickerless)] or [Auto (Flickerless2)]
(P. 63).
– When the exposure mode is [Auto (Shutter-priority AE)] or [Manual], shutter speed
is locked to power supply frequency (power supply frequency fixed at 1/120 sec
for 60 Hz, 1/100 sec for 50 Hz) (P. 64).
– Change the system frequency (P. 157)
Video is temporarily interrupted. • When the network load is high, or depending on the stream settings, the video may be
temporarily interrupted. Revise the video settings (P. 58).
There is an afterimage of the moving subject. • It may be reduced by setting [Noise Reduction] to [Mild] in the Settings page under
[Video] > [Preset] > [Image Adjustment].
Problem Countermeasures
To Next Page
Loading...
