Canon VB-H47 - Page 188

188
[System] > [Viewer]
[System] > [Date and Time]
[System] > [Network]
[Maintenance] > [Environment]
[Maintenance] > [Log]
External Output Device
External Output Device 1, 2
Device Name
Device Name (alphanumeric
characters)
General
Default Page Display Settings Page
Viewer Settings
User Authentication Authenticate
Rotate Video Display Do not rotate
In-Viewer Picture Adjustment Do not allow
Settings
Settings Method Set manually
Set NTP Server Settings
Automatically
Disable
NTP Server
NTP Server (DHCP)
NTP Server (DHCPv6)
Synchronization Interval (minutes) 5
Last Sync Time
Time Zone (GMT+09:00) Osaka,
Sapporo, Tokyo
Daylight Saving Time Disable
LAN
Maximum Packet Size 1500
IPv4
IPv4 Address Settings Method Auto (DHCP)
IPv4 Address 192.168.100.1
IPv4 Address (DHCP)
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
IPv4 Default Gateway Address
(DHCP)
AutoIP Enable
IPv4 Address (AutoIP)
IPv6
IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual)
S32VE
S32D S820D/S920F
HM4x
S820D/S920F
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto)
DNS
Name Server Address 1
Name Server Address 2
Set Name Server Address
Automatically
Use DHCP/DHCPv6
Name Server Address (DHCP)
Name Server Address (DHCPv6)
Host Name
Host Name Registration with DDNS Do Not Register
mDNS
Use mDNS Enable
Environment
System Frequency (Hz) 60
WDR Mild
Intelligent Function Disable
Log Notifications
Use log notifications Disable
Notification Level Error
Mail Server Name
Mail Server Port 25
Sender (From)
Recipient (To)
Authentication None
User Name
Verify Server Certificate Verify
POP Server
Subject