45
Using Presets or the Home Position
Able to use a registered preset or home position to specify the range for Digital PTZ.
When a preset is selected, the preview frame on the Digital PTZ panel moves to the preset position, and the video
inside the frame is shown in the video display area.
• Register presets in advance in [Video] > [Preset] > [Register Preset] on the Settings page (P. 69).
Exiting Digital PTZ
To exit the Digital PTZ, perform one of the following operations.
• Click the [Digital PTZ] button to disable the Digital PTZ.
• Click the [Viewer PTZ] button to start the Viewer PTZ.
• Even performing the following operations, so long as the [Digital PTZ] button is active (purple) the Digital PTZ continues without
being closed.
– Click the [Close] button on the control display area to close the Digital PTZ panel.
– Click the snapshot tab or panorama display tab ( ) to switch the panel in the control display area.
To Next Page
Loading...
