Capstone Microturbine C1000 Series - Figure 4. C1000 S;C800 S;C600 S Lifting Example

Capstone Turbine Corporation • 16640 Stagg Street • Van Nuys • CA 91406 • USA
Installation Guide: Capstone C1000S/C800S/C600S with C1000 Series Controller
480064 Rev C (December 2018) Page 21 of 122
Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without
incurring any obligation either with respect to equipment previously sold or in the process of construction.
Figure 4. C1000S/C800S/C600S Lifting Example
Bottom Lift via Properly
Rated Forklift
Four Corner Top Lift
via Properly Rated
Gantry Crane
Four Corner Top Lift via
Properly Rated Spreader
Bar and Crane
Maximum Allowable
Lift Angle Determined
by Spreader Bar
Manufacturer