Capstone Microturbine C1000 Series User Manual

Capstone Turbine Corporation • 16640 Stagg Street • Van Nuys • CA 91406 • USA
Installation Guide: Capstone C1000S/C800S/C600S with C1000 Series Controller
480064 Rev C (December 2018) Page 22 of 122
Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without
incurring any obligation either with respect to equipment previously sold or in the process of construction.
2.4. Assembly
Before operation, the following components must be installed on the C1000S/C800S/C600S
enclosure:
 Door latches and striker plates. Refer to the C1000S Latch and Striker Plate Installation
Guide (Table 1).
 Exhaust flappers. Refer to the C1000S Exhaust Rain Cap Installation Guide (Table 1).
 Air inlet hood assemblies. Refer to the C1000S Inlet Hood Installation Guide (Table 1).

Capstone Microturbine C1000 Series Specifications

General

Brand	Capstone
Model	Microturbine C1000 Series
Category	Controller
Language	English