CAS CUX Series User Manual

2
4
4. Install the pan. With small pan model with
minimum display of 0.001g, the standard
windbreak is also installed here.
a. Large pan model
Insert the four pan supporter caps into the
holes in the top of the balance. Place the
pan gently on pan supporter caps.
Positioners of the pan must fit pan
supporter.
b. Small pan model
(minimum display 0.01g)
Insert the four pan supporter caps into the
holes in the top of the balance. Place the
pan gently on pan supporter caps.
Positioners of the pan must fit pan
supporter.
The rubber caps on top of the main body may be
replaced with the stainless screws so that it will
be more secure when exposed to organic solvent.
c. Small pan model
(minimum display 0.001g,
windbreak standard)
(1) Pull out the two rubber caps from the
main body top.

CAS CUX Series Specifications

General

Brand	CAS
Model	CUX Series
Category	Scales
Language	English